BS EN 12735-2-2001
|
ID： |
B6A348758CAF401F86A5A1000A50AB40 |
|
文件大小(MB)： |
0.18 |
|
页数： |
22 |
|
文件格式： |
|
|
日期： |
2013-6-23 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,12735-2:2001,Incorporating,Amendment No. 1,Copper and copper,alloys — Seamless,round copper tubes for,air conditioning and,refrigeration —,Part 2: Tubes for equipment,The European Standard EN 12735-2:2001, with the incorporation of,amendment A1:2005, has the status of a British Standard,ICS 77.150.30; 91.140.30,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Nov 05 00:55:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,BS EN 12735-2:2001,This British Standard, having,been prepared under the,direction of the Engineering,Sector Committee, was,published under the authority,of the Standards Committee,and comes into effect on,15 June 2001,. BSI August 2006,ISBN 0 580 37090 9,National foreword,This British Standard is the official English language version of,EN 12735-2:2001, including amendment A1:2005.,The start and finish of text introduced or altered by CEN amendment is,indicated in the text by tags .. Tages indicating changes to CEN text,carry the number of the CEN amendment. For example, text altered by,CEN amendment A1 is indicated by ..,The UK participation in its preparation was entrusted by Technical Committee,NFE/34, Copper and copper alloys, to Subcommittee NFE/34/1, Wrought and,unwrought copper and copper alloys, which has the responsibility to:,A list of organizations represented on this subcommittee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Standards,Catalogue under the section entitled “International Standards Correspondence,Index”, or by using the “Find” facility of the BSI Standards Electronic,Catalogue.,A British Standard does not purport to include all the necessary provisions of,a contract. Users of British Standards are responsible for their correct,application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible European committee any enquiries on the,interpretation, or proposals for change, and keep the UK interests,informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 18 and a back cover.,The BSI copyright date displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,16369 August 2006 See national foreword,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Nov 05 00:55:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 12735-2,April 2001,+A1,April 2005,ICS 23.040.15,English version,Copper and copper alloys - Seamless, round copper tubes for,air conditioning and refrigeration - Part 2: Tubes for equipment,(includes amendment A1:2005),Cuivre et alliages de cuivre - Tubes ronds sans soudure en,cuivre pour l'air conditionné et la réfrigération - Partie 2:,Tubes pour le matériel,(inclut I’amendement A1:2005),Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus,Kupfer für die K鋖te- und Klimatechnik - Teil 2: Rohre für,Apparate,(enth鋖t 膎derung A1:2005),This European Standard was approved by CEN on 6 March 2001. Amendment A1:2005 was approved by CEN on 15 March 2005.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2001 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Ref. No. EN 12735-2:2001 +A1:2005 E,Licensed Copy: Institute Of Te……
……